How to wear a Facemask Safely during Coronavirus

How to wear a Face Mask safely during Coronavirus

Washable, reusable fabric face mask with Silvadur™ antibacterial protection to guard face, nose and mouth against respiratory droplets and splashes.

This mask provides a physical barrier protection against larger respiratory droplets, germ particles, and splashes for the user and the environment. While this mask will provide some protection against, it will not act as a barrier against smaller respiratory droplets or germ particles.

How to put a Face Mask on safely

When putting mask on, place shiny side to face, with pleats facing downward. Put loops over ears, and adjust to tightly cover the nose and mouth (or respirator if combined). If a tighter fit is required, the loops can be twisted before placing over ears.

How to safely remove your face mask

To remove contaminated mask, avoid touching outer layer of mask or your face. Remove from ears, only touching loops, and immediately put into washer, sterilizer or safe storage.

How to clean your face mask

Clean mask by washing or sterilizing before re-use every time. Sanitize hands immediately after handling contaminated masks each time. Clean after multiple use or if soiled. Discard if damaged or torn.

Machine wash | Tumble dry

Do not use fabric softener | Do not use bleach

The Medasun Medical Reusable Antibacterial Face Mask is:

Washable multiple times without losing effectiveness, even at high temperatures – ≥160°F (≥71°C)
May be steam cleaned at temperatures between 212°F (100°C) and 270°F (132°C)
May be ironed at temperatures up to 365°F (185°C)

* This product is authorized for sale under an FDA Emergency Use Authorization (dated April 18, 2020). Specifically, this product is authorized for sale as a Non-Surgical Face Mask (Class I medical device) to be used by the general public and/or by Health Care Professionals in a healthcare setting, as Personal Protective Equipment (PPE). This product is non-sterile and has not been tested to N95 or other standards for particulate filtration, liquid barrier protection, resistance to high intensity heat source / flammable gas, or infection prevention. It is not intended to be used as a respirator or in such clinical setting where the risk level of infection through fluids or inhalation exposure is high. This mask has not been tested for effectiveness against the COVID-19 virus. Each mask is intended for use by one person only and must not be shared. See instructions for use and cleaning, provided separately.